Portable power stations: check the chemistry per model
Eleven portable power station models. The chemistry differs by model — some stations are LiFePO4, others are Li-ion or LiPo — and this page states that distinction instead of calling every station LiPo.
Dimension-callout pouch outline — the site's recurring diagram motif. It is a schematic, not a photograph of a product, factory or customer project.
Home / Products
A portable power station is a finished product: cells, inverter, charging and outlets in one box, sold by watt-hours and output watts rather than by cell voltage alone. That makes the buying question different from a cell purchase. The buyer needs the energy capacity in watt-hours, the continuous output in watts, the outlets the station provides, and the recharge options — solar, mains or vehicle — rather than a cell specification.
Chemistry matters here because it changes cycle life and weight expectations. The N054 station is listed at 512 Wh with a 3000-times cycle life, and the N067 at 2048 Wh with a 4000-times cycle life, both listed as LiFePO4 stations. The G2000 and M9 models are listed with their own capacities, cycle lives and terms under their own chemistries. Quoting one station's cycle life for another would mislead, so this page keeps every figure attached to its model.
For an inquiry, state the loads you will run, the total energy you need between charges, and the output power of your largest load. A station that runs lights and phones is a different purchase from a station that must start a power tool, and the right model follows from the loads, not from the largest watt-hour number on the page.
How to choose in this family
Fix the shape first, then the voltage and series count, then the capacity. Check the exact model listing for its own minimum order, enquiry price range, lead time and certificate set — those values belong to that listing and do not transfer to other models. If no listed size fits your enclosure, the custom route covers custom dimensions and shapes; describe the enclosure rather than asking for a general price.
Related pages
LiFePO4 packs · Li-ion packs · Capacity selection · Wholesale buying
How to place an inquiry, step by step
- Send the device facts. Tell us the device type, the available space (length, width and maximum thickness), the nominal voltage you need, the capacity or runtime you target, and the peak current if your device has motors, radios or heaters.
- Name the model or the shape. If a page on this site matches, quote its model number and listing details. If nothing matches, say so and describe the shape — flat, round, curved or ultra-thin — so the conversation starts on the custom route.
- Confirm documents and terms in writing. Ask for the certificate set for that exact model, confirm the minimum order, the listed enquiry price range and the lead time for that listing, and confirm payment and warranty terms before you pay. Terms stated for one model listing do not transfer to another model.
- Agree the sample step. Confirm whether the next step is a listed sample, an engineering sample for a custom shape, or a small trial order, and what test you will run on arrival — fit in the enclosure, runtime, or peak-current behaviour.
Send all of this in one message through the contact page: device type, space, voltage, capacity, peak current, model number if you have one, and the documents you need. That is the whole inquiry — one message, no account, no extra step.
What to send us now
Send one message with your device type, the space the battery must fit, the voltage and capacity you need, the peak current if it matters, and the model number if a page on this site already matches. Add the documents you need — certificates available upon request — and whether you need a listed model or a custom shape. Use the contact page and address it to the sales team by first name as published there. A specific message like that is what turns a catalogue of hundreds of models into a short, answerable question.